LONGEVITY VS. DRAG
With any line type there is a correlation between strength, longevity and drag. There is a trade-off between strength and drag. The thicker Vectran 750 will induce more wind resistance, but will be stronger and will last longer than Vectran 550.
As wing loading increases the effect of drag caused by lines becomes more noticeable. Thinner line will induce less drag which is beneficial for high performance wings, however the trade-off will be longevity and require more frequent relines and regular inspections.
Reduced drag can be taken to extremes by competition pilots using line sets made from Vectran 300 or even 200 lb line. These lines are very much on the limits, careful attention should be paid to jump numbers especially if being used terminal.
LONGEVITY VS. PACK VOLUME
In containers where pack volume is tight, the option for slightly thinner lines may outweigh a preference for longevity. In which case dropping down a line size to say V550 will decrease over all pack volume, but be aware you will generally need to change the lineset more often.
SUMMARY OF LINE TYPES
|Vectran||High strength for its size. Trim remains constant.||Wears relatively easily|
|HMA||Trim remains constant.||Wears more easily than Vectran|
|Dacron||Elastic and long lasting||Shrinks, which alters trim. Bulky|
|Spectra||Strong and more resistance to wear & tear.||Won't maintain correct trim - Shrinks|
Vectran is our preferred and most commonly used linetype, standard on all our canopies but the Matrix2. It is a very strong line and doesn't stretch or shrink easily, so it holds its trim well. It wears more easily than Spectra, especially in hot, dry or desert-like environments.
High Modulus Aramid (HMA), also known as Technora, is a very strong, small diameter line with characteristics similar to Vectran. More commonly found on our higher performance cross-brace canopies. It's harder to estimate the extent of wear on HMA compared to vectran so should be examined often and thoroughly by a rigger. HMA has a big trade off that can sometimes mean replacing the lines well before any other type.
Dacron is more elastic than other lines, providing more shock absorption for fast openings. It comes standard on our Matrix2 CRW canopies, and we offer it as an option for Tandems and Omegas. Dacron is a thick, heavy line and adds considerable bulk to pack volume.
Spectra is the toughest of all the line types: it's strong and lasts the longest. However, it will shrink due to the heat generated by the slider descending down the lines on opening - so the line may look good, but after a few hundred jumps it will have shrunk unevenly, affecting how your canopy flies and opens.
This is especially apparent with more responsive wings at higher wing loadings. Because of this propensity to shrink, we don't recommend Spectra, but we do still offer it as an option on Tandems, Omegas, Safire 3s and Icarus Students for people who are still fond of it.
JYRO LINE TYPES
The line types we offer at JYRO (previously NZ Aerosports) are:
Vectran: V1600, V1050, V750, V550, V400, V300, V200
Dacron: D900, D525
Spectra: S1500, S725
The number beside the line type indicates the breaking strength of the line in Lbs. The higher the number, the stronger and thicker the line.
RECOMMENDED LINE TYPES & SIZES FOR JYRO CANOPIES
Petra: Vectran 300
Leia: Vectran 400
JFX 2: Vectran 400/550
Crossfire 3: Vectran 550/750
Safire 3: Vectran 550/750
Kraken: Vectran 550/750
Student: Vectran 750
Tandem: Vectran 1050/HMA 1200
SLeia: Vectran 300/400
Sofia: Vectran 300
JVX: Vectran 400/550
- Extreme FX: Vectran 400/550
Extreme VX: Vectran 400/550
Crossfire 1 & 2: Vectran 550/750
Safire 1 & 2: Vectran 550/750
JFX: Vectran 400/550
- Matrix2: Dacron 525/Vectran 550
Alpha: Vectran 550/750
Beta: Vectran 550/750
Order a Sport Lineset here
Order a Tandem - Vectran Lineset here
Order a Tandem - HMA Lineset here
Please sign in to leave a comment.